RM400.00
The NUX TIME CORE DELUXE MKII is a delay pedal with 7 different types and a phrase looper; including ΦPhi Digital Delay, Analog Delay, Modulation Delay, Tape Echo, Pan Delay, Verb Delay, Reverse Delay and Sound On Sound. You can switch the delay type by using the Type rotary switch.
S.O.S, Sound On Sound is a 40 seconds stereo phrase looper for guitarists to practice and create new ideas. While in playback, you can quit S.O.S to select another delay mode and use the effect to play, without interrupting the playback. (Note: When quitting S.O.S mode to another delay, the delay effect will be engaged.)
In S.O.S mode, the footswitch operation is like a regular looper pedal. While REC, the LED indicator shows RED, while PLAY, the LED indicator shows GREEN, while OVERDUB, the LED indicator shows ORANGE.
In Mod. D & Verb style, holding the footswitch will enter Alt mode (the LED indicator will flash ORANGE), you can then adjust the Mod or Verb parameters via the Repeat knob. Short-press the footswitch to quit Alt mode.
Kill Dry: Without any USB connection, hold the footswitch to boot up the pedal. If the LED indicator flashes GREEN 3 times, the KILL DRY is engaged. If the LED indicator flashes RED 3 times, the KILL DRY is disengaged. (Normal)
Use ONLY: 9V Negative Tip power with more than 150mA. (The power consumption is less than 125mA.)
USB-C port
The USB-C port is for firmware updates. Connect the USB cable to a PC and hold the footswitch to boot up the device and to enter the DFU (Device Firmware Update) mode. Once connected, you can perform firmware updates using the DFU updater software. *Download the related firmware and firmware update guide from NUX’s product page.
In jacks
The audio inputs on the right side of this pedal are standard 1/4″ jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4″ instrument cable.1
The pedal also accepts stereo signals using a pair of 1/4″ TS cables.
Out jacks
The audio outputs on the left side of this pedal are standard 1/4″ jacks (mono/TS). Connect the audio output of your pedal to the next device in the signal chain, either with a single cable or with a pair of 1/4″ cables if both inputs are used.
1. To the amp’s input
2. In the amp’s FX loop
If the amp’s FX loop is parallel, you will need to engage Kill Dry.
Kill Dry: Without USB connection, hold the footswitch to boot-up the pedal, if the LED indicator flash GREEN 3 times, the KILL DRY is engaged. If the LED indicator flashes RED 3 times, the KILL DRY is disengaged. (Normal)
| Attribute | Specification |
|---|---|
| Series | Core Deluxe Series |
| Delay Types | ΦPhi Digital, Analog, Modulation, Tape Echo, Pan, Verb, Reverse |
| Max Delay Time | 1580ms (via Smart Tap) |
| Looper (S.O.S) | 40 Seconds Stereo Phrase Loop |
| DSP Processing | 48kHz / 32-bit |
| Input Impedance | 1M Ohms |
| Output Impedance | 1K Ohms |
| I/O | 2 x 1/4″ In, 2 x 1/4″ Out (True Stereo) |
| Switching | True Bypass / Buffer Bypass (Tails) / Kill Dry |
| Current Draw | < 120 mA |
| Power | 9V DC (Negative Tip) / USB-C for Updates |
The ultimate destination for both new and used pianos, and an extensive range of musical instruments, including grand pianos, upright pianos, and digital pianos.
