RM460.00
On the left side of the pedal is the Horseman with SILVER mode. The Horseman is based on the legendary Centaur, with a modified circuit to access the secondary function by simply holding the foot switch~ SILVER mode. Carve out your tone with the Output, Treble, and Gain knobs, then try switching between the 2 modes: Gold and Silver, which offer massive headway usually requiring an 18v input. Gold Mode mimics its classic predecessor, the transparent Gold Centaur overdrive pedal, and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur).
On the right side of the pedal is the Morning Star with SHINE mode. The Morning Star is based on the legendary Bluesbreaker circuit: a very transparent, low-gain drive. Like our Morning Star, it also features a simple foot switch hold to engage the iconic SHINE mode for a crystal clear treble boosted tone.
By using the versatile routing and toggle switches, you can adjust the order of the overdrives, MS ->HM or HM->MS. On the back of the pedal, you can toggle the BF/TB switch for Buffer-Bypass or True-Bypass, and the IFS/NORMAL switch to engage the INPUT FET STAGE (IFS) to increase the input signal in order to reach the amp’s breakthrough edge that can drive the tube amplifier hotter.
Left side (Horseman)
OUTPUT knob: Controls the output level of Horseman circuit.
TONE knob: Controls the treble frequency of Horseman circuit.
GAIN knob: Controls the drive level of Horseman circuit.
Footswitch: Engage/disengage Horseman circuit. Hold it for 1 second, you can turn on/off SILVER mode.
SILVER indicator: While you engaged SILVER mode, the indicator will turn on.
Right side (Morning Star)
DRIVE knob: Controls the gain of Morning Star circuit.
TONE knob: Controls the treble frequency of Morning Star circuit.
LEVEL knob: Controls the volume of Morning Star circuit.
Footswitch: Engage/disengage Morning Star circuit. Hold it for 1 second, you can turn on/off SHINE mode.
SHINE indicator: While you engaged SHINE mode, the indicator will turn on.
Input: Connect your guitar side to INPUT jack.
Output: Connect the OUTPUT signal to the amp side.
EXT. SW: You can use an external foot controller (like NUX NMP-2) to remotely control this pedal.
BF/TB Toggle Switch: BF means Buffer-Bypass, TB means True-Bypass. You can choose BF while you connect with several pedals in your signal chain to solve a tone-loss situation.
18V/9V Toggle Switch: QUEEN of TONE can engage the INPUT FET STAGE while you toggle to the IFS position, which can increase the input signal to reach the amp’s breakthrough edge that can drive the tube amplifier hotter.
Use ONLY: 9V Negative Tip power with 100mA.
| Attribute | Specification |
|---|---|
| Series | Verdugo Series |
| Circuit Type | Analog Dual Overdrive |
| Left Side (Morn Morning) | Bluesbreaker-style (Shine Mode available) |
| Right Side (Horseman) | K-style (Gold & Silver Modes available) |
| Routing Switch | Morn Morning > Horseman / Horseman > Morn Morning |
| Voltage Toggle | 9V / 18V (Internal Voltage Doubler) |
| Bypass Mode | True Bypass / Buffer Bypass (Switchable) |
| Input Impedance | 1M Ohms |
| Output Impedance | 10K Ohms |
| Current Draw | < 100 mA |
| Power | 9V DC (Negative Tip) |
| Dimensions | 105(L) * 115(W) * 58(H) mm |
The ultimate destination for both new and used pianos, and an extensive range of musical instruments, including grand pianos, upright pianos, and digital pianos.
