RM400.00
The NUX MOD CORE DELUXE MKII is a modulation pedal with 8 different types, including ST.CH (Stereo Chorus), CE-1, SCF CHO, SCF FLG, SCF P.M., U-VIBE CHO, U-VIBE VIB and PH-100. You can switch the mod types by way of the Type rotary switch.
This pedal offers advanced signal routing with the included Send and Return. Easily split the mono signal to create customized effect loops! Additionally, you can parallel the 2 signals and use the Tweak knob in Alt mode to blend the signals. Use the 3-way toggle switch to the desired position, and you are good to go. Keep reading below for more signal routing ideas
DC jack
Use ONLY: 9V Negative Tip power with more than 150mA. (The power consumption is less than 110mA.)
USB-C port
The USB-C port is for firmware updates. Connect a USB cable to your PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software. *Download the related firmware and firmware update guide from Nux’s product page.
In jack
The audio inputs on the right side of this pedal are standard 1/4″ jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4″ instrument cable.
Return jack
In advanced routing, connect Pre-effects like OD/Dist output to the Return jack.
Out jacks
Normal routing:
The audio outputs on the left side of this pedal are standard 1/4″ jacks (mono/TS). Connect the audio output of Out1 to the next device in the signal chain, either with a single cable or with a pair of 1/4″ cables if both Out1 and Out2 are being used.
Advanced routing:
Out1 sends the modulation effect out. Send out sends the loop signal out.
1. Normal routing: (In this connection, the toggle switch has no function.)
To the amp’s input.
2. Advanced routing: (You can assign PRE, // PARALLEL, POST through the toggle switch.)
In line.
In the amp’s FX loop.
| Attribute | Specification |
|---|---|
| Series | Core Deluxe Series |
| Modulation Types | ST.CH (Stereo Chorus), CE-1, ST.FL (Flanger), PAN (Phase), SC.FL (Soft Flanger), U-VIBE, ROTARY, VIBRA |
| DSP Processing | 48kHz / 32-bit (24-bit A/D D/A) |
| Routing Options | Stereo In/Out, Mono In/Out, Parallel/Series via Toggle |
| Input Impedance | 1M Ohms |
| Output Impedance | 1K Ohms |
| Dynamic Range | 103 dB |
| Current Draw | < 120 mA |
| Power | 9V DC (Negative Tip) / USB-C for Updates |
| Switching | True Bypass / Buffer Bypass (Switchable) |
| Dimensions | 122(L) * 72(W) * 47(H) mm |
The ultimate destination for both new and used pianos, and an extensive range of musical instruments, including grand pianos, upright pianos, and digital pianos.
