Audio Technica AT2050 Multi-Pattern Condenser Microphone with Pop Filter (Audio-Technica / AT-2050F / AT 2050F)

Original price was: RM1,190.00.Current price is: RM939.00.

Element	Externally-polarized (DC bias) condenser
Polar Pattern	Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern
Frequency Response	20 – 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-42 dB (7.9 mV) re 1V at 1 Pa
Maximum Input Sound Level	149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Dynamic Range	136 dB, 1 kHz at Max SPL

Sorry, this item is out of stock, but available for pre-order.

WhatsApp Us

AT2050

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features

Three switchable polar patterns: omni, cardioid, figure-of-eight
Switchable 80 Hz high-pass filter and 10 dB pad
Large diaphragm for smooth, natural sound and low noise
State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
Includes shock mount & protective pouch

Microphones
Element	Externally-polarized (DC bias) condenser
Polar Pattern	Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern
Frequency Response	20 – 20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-42 dB (7.9 mV) re 1V at 1 Pa
Maximum Input Sound Level	149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Dynamic Range	136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	77 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 4.7 mA typical
Weight	412g
Dimensions	170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch