
PA Systems
Refine Search
- Tube: No
- Switchable Polar Pattern: No
- Omnidirectional: No
- Cardioid: Yes
- Figure-8: No
- Low Cut: Yes
- Pad: Yes
- Shockmount included: Yes
- USB Microphone: No
RM510.00
RM640.00
- Tube: No
- Switchable Polar Pattern: No
- Omnidirectional: No
- Cardioid: Yes
- Figure-8: No
- Low Cut: No
- Pad: No
- Shockmount included: No
- USB Microphone: No
RM190.00
RM240.00
- 2 Professional condenser microphones.
- Cardioid
- In pairs
- Switchable high-pass filter and optional level reduction (-10 dB)
- Transmitterless FET input circuit
- Gold-plated XLR connectors
- Operation with 48 Volt phantom power
- Including micro-clips, windscreen, stereoscreen and transport case
- Battery Powered: No
- Stereo Pair: Yes
RM265.00
RM330.00
- Effects processor for all EQ, RTA and dynamic applications, especially for PA and mastering
- Four concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel)
- Flexible compressor/expander function with peak limiter as well as multi-parametric Stereo Imager and Stereo Delay for delay line applications
- Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs
- Ultra-high resolution 61-Band Real-Time FFT analyser with additional auto EQ function for room and loudspeaker equalisation
- Multi-functional level meters (Peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input)
- 64 User memories for complete setups and/or individual module configurations
- Separate RTA mic/line input with phantom power, professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates
- High-quality AKM® 24-Bit/96 kHz A/D and D/A converters (113 dB dynamic range)
- Open architecture allowing future software updates via MIDI
- Two 32/40-Bit floating point SHARC® signal processors for ultimate sonic resolution
- Balanced inputs and servo-balanced outputs with gold-plated XLR connectors
- Stereo AUX output
- AES/EBU and S/PDIF inputs and outputs (XLR and optical)
- Switching power supply (100 - 240 V ~)
- Size: 19'' / 1U
RM1,795.00
RM2,245.00
- Jack input
- XLR Out
- -20 / 40dB PAD (up to 3000 W)
- Operable via battery (9V) or phantom (15-52V)
- With the ground switch ground loop can be eliminated
- Battery-off switchable
- Additional Split mode (channel 1 assigns signal to both XLR outputs)
- In link mode Channel 2 outputs the signal from channel 1 balanced
- Robust housing
RM145.00
RM180.00
- Multi-Channel Unit: No
- Active/Passive: Passive
- 19": No
- Pad Switchable: No
- Gnd/Lift Switchable: Yes
- Powered by battery: No
- Speaker Simulation: No
RM115.00
RM145.00
- Multifunctional Housng: Yes
- Pole Mount: Yes
- Flyable: No
- Woofer size: 1 x 10"
- Tweeter, 1" and Larger: Yes
- Weight in kg: 8.1 kg
RM965.00
RM1,205.00
- Multifunctional Housng: Yes
- Pole Mount: Yes
- Flyable: No
- Woofer size: 1 x 12"
- Tweeter, 1" and Larger: Yes
- Weight in kg: 12.3 kg
RM1,175.00
RM1,470.00
- Multifunctional Housng: Yes
- Pole Mount: Yes
- Flyable: No
- Woofer size: 1 x 15"
- Tweeter, 1" and Larger: Yes
- Weight in kg: 17.1 kg
RM1,380.00
RM1,725.00
- Multifunctional Housng: Yes
- Microphone Input: Yes
- Woofer size: 1 x 12"
- Tweeter, 1" and Larger: Yes
- Line Inputs: Yes
RM1,245.00
RM1,555.00
- Audio Analyzer
- Low-noise operational amplifiers
- Servo-balanced inputs and outputs with jack and XLR
- Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz
- Adjustable Low- and Hi-Cut
- 12-Digit LED display for in - and output signal
- Input level control
- Hard bypass switch
- Illuminated faders
- Design: 19" / 2U
RM800.00
RM1,000.00
- 71 New algorithms, including real studio-quality stereo and 3D effects
- Modulation
- Dynamic, psychoacoustic and EQ algorithms
- Authentic amplifier emulation, distortion and special effects
- 11 Effect combinations with selectable serial or parallel configuration
- Up to 7 adjustable parameters and a 2-band EQ per effect
- 24-bit A/D and D/A converters with 64x and 128x oversampling, respectively
- 100 Presets and 100 user memories
- Comprehensive MIDI implementation
- Connectors: Balanced XLR and 6.3 mm jacks
- Weight: 2 kg (shipping weight: 3 kg)
- Dimensions (HxWxD): 44 x 482.6 x 204.4 mm
RM770.00
RM965.00
- Components: 1 x 10"
- Power: 180W
- Frequency range: 40-150 Hz
RM1,935.00
RM2,420.00
- Speaker size: 1 x 5"
- Amplifier power per unit (RMS): 100W
- Magnetic Shielding: No
- Analogue XLR Input: Yes
- Analogue Input (Jack): Yes
- Analogue Input (Mini Jack): No
- Analogue Input (RCA): Yes
- Digital Input: No
- Manual frequency correction: Yes
RM770.00
RM965.00
- Gives the overall sound more transparency, space and depth
- Separate knobs per channel for Tune, Harmonics and Mix on the Exciter section
- Separate knobs per channel for Drive, Tune and Mix on the Bass Processor section
- Servo-balanced inputs and outputs with 6.3 mm jack and gold-plated XLR sockets
- Power supply: 100 - 240 V AC / 50 - 60 Hz
- Dimensions: 19", 1U, 150 mm case depth
- Weight: 1.5 kg
RM575.00
RM720.00